ngHobbies
DIVERSITY DUO 2.4 RECEIVER
| Weight | 195 |
Features:, 1 button operation, Please note:, This system requires a 6-12V power source not included in the package., Size:, 110 x 83 x 26 mm, Documentation:, , Software to decode telemetry data for google earth:, Download now,
The Immersion RC's Diversity Duo receiver is the best diversity ...ngHobbies
RCR-N232M SERIAL TO ETHERNET SERVER
,
RCR-N232 with a DB9 male connector allows you to connect ...ngHobbies
WI-N232F HIGH POWER 802.11B/G WIRELESS SERIAL TO ETHERNET SERVER
,
The WI-N232 with a DB9 female connector Not only does ...ngHobbies
MPI 70-100A WATT METER
| • Dimensions | 4.0 x 2.2 x 0.9 in, Weight |
Features:, • 70A continuous, 100A max,, Documentation:, Included in the package,
MPI's 70A watt meter should be part of any field ...ngHobbies
VIDEO OSD PRO EXPANDER
All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro. Here are some examples:, GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed,Course, and more), Advanced Features:, The OSD PRO advanced features include "RADAR," Voice Alerts, Return to Home,failsafe, and Waypoints., :, The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointingindicates your present course. And, the location of the icon on the screen provides a synthetic map, similar to RADAR: the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction is configurable., Voice Alerts/Variometer:, Imagine hearing the status of your model through earbuds connected to your video receiver! The OSD Pro fully supports voice warnings and status updates, via theaudio channel of your video transmitter. Most of the available parameters can be programmed to provide voice alerts., For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”. And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”. Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts., Return to Home and Failsafe:, , Flight Simulator:, A built-in flight simulator is included, letting you fly the RADAR icon around the screen, controlling altitude, throttle and turns with your RC Radio. Since the control surfaces of your model will move at the same time, this feature makes it easier to configure Return to Home and test your alarms and settings, and is also fun on rainy days!, Waypoints:, Up to 3 waypoints (within visual range of the takeoff point) can be programmed into the OSD Pro, for aerial photography or just for fun. The locations of the waypoints are displayed on the RADAR display,
The OSD Pro is a powerful, modular, fully configurable Video/Audio ...ngHobbies
LMR-195 SMA MALE TO SMA MALE ANTENNA CABLE
Connectors:, 1 x SMA Male,
Constructed of premium LMR-195 Low-Loss 50 ohm RF outdoor coaxial ...ngHobbies
OKTO/OKTO2 POWER DISTRIBUTION BOARD
| • Dimensions | 120 x 120 x 1 mm |
Specifications:, , Documentation:, -,
This is an 8-fold power distribution printed circuit board. Using ...ngHobbies
NGH Q6
| There are different charging modes for all requirements | Charging-Auto/Balance, Fast charging cycle, Charging for storage, Cyclic charging, etc. |
Features:, Input Voltage range:, DC: 11V-18V, Charging current range:, 0.1A - 5A, Charge power limit:, Max. 50Wx4, Discharge power limit:, Max 5Wx4, Balancing current:, max 250mA, NiCd/NiMH cell count:, 1-15cells, Lithium battery types:, Li-Po, Li-Ion, Li-Fe, Lithium battery cell count:, 1-6 cell, Pb battery voltage:, 2-20V, Weight:, 1090g, Dimensions:, 220x150x55mm, Ports:, DC input, 4 x Balancing Port, 4 x Output port, Temperature sensor,
The NGH-Q6 charger is the master of all chargers, 4 ...ngHobbies
FUNJET ULTRA ARF ELECTRIC RC AIRPLANE
,
Just when you thought your Multiplex FunJet was one of ...ngHobbies
OKTO XL POWER DISTRIBUTION BOARD
| • Dimensions | 120 x 120 x 1 mm |
Specifications:, , Documentation:, -,
This is a power distribution board for the Okto XL. ...ngHobbies
BL-CTRL V2.0 SPEED CONTROLLER
| •PCB | 4-layers (increased current-measuring shunt) |
| •Drill | 3mm |
| •Dimension (W x H) | approx 44mm x 21mm |
This new version has the following features:, •Integrated current measurementfor measuring the actual current and the used capacity, The following items are included in this kit:,
The BL-Ctrl V2.0 is the newly released speed controller for ...ngHobbies
QUADRO XL POWER DISTRIBUTION BOARD
| • Dimensions | 120 x 120 x 1 mm |
Specifications:, , Documentation:, -,
This is an 4-fold power distribution printed circuit board for ...ngHobbies
HEXA POWER DISTRIBUTION BOARD
| • Dimensions | 120 x 120 x 1 mm |
Specifications:, , Documentation:, -,
This is an 6-fold power distribution printed circuit board. Using ...ngHobbies
EZUHF TRANSMITTER
| Width | 75mm |
| Height | 25mm |
| Length | 85mm |
| Weight | 120 grams (without antenna) |
Notice:, , Dimensions:, , Content of the pacakge:, 1 x EzUHF Transmitter, Note:, , Documentation:, , Support thread on RcGroups:,
The EzUHF transmitter is a true powerhouse with a wealth ...ngHobbies
GPS-SHIELD 1.1
The following items are included in this kit:, , Documentation:, Click here,
This cover is made from thin circuit board which will ...